This is not so much of a how to but more of a quick checklist on the minimum things we need to do to create an instance that we'll use as a template.
It's expected that the FreeBSD installation is …
Just some quick notes on how to set up dnsmasq as both a DHCP and DNS server. Most of the steps are copied from my old post here plus some info I found online: dnsmasq For Easy LAN Name Services dnsmasq on the Gentoo wiki dd-wrt's page on dnsmasq
1 …
In my adventures to get a PXE server running, I run into a limitation of the isc-dhcp server - you need to have a host entry for each new machine you want to PXE boot. But this can be a problem if I just want to keep adding machines and PXE …
I have a simple local area network where my router is also the DHCP server. It's IP address is 192.168.2.1.
For testing purposes I've been playing with a second DHCP server on the same network running inside VirtualBox - that machine is set to 192.168.2.99 …
I've been meaning to set up a DHCP server on FreeBSD for a while, so these are my notes for a simple configuration. This is based on the following: